The Toyota Grand Highlander, 1st generation, lists these tire sizes in the manual: 255/65R18 and 255/55R20. Lug nut torque is 103 lb-ft. Cold tire pressure is 35 psi.
The Grand Highlander's tire page is simple on pressure, since both wheel types list 35 psi front and rear, but it carries a number that surprises people who've worked on other Toyotas. Lug nuts go to 103 lb-ft.
Toyota Grand Highlander specs, by the manual
| Spec | Value | Applies to | Source |
|---|---|---|---|
| Tire size | 255/65R18 111H | 18-inch wheels (type A) | p. 524 |
| Tire size | 255/55R20 107V | 20-inch wheels (type B) | p. 524 |
| Cold pressure | 35 psi | Type A, 18-inch | p. 524 |
| Cold pressure | 35 psi | Type B, 20-inch | p. 524 |
| Wheel size | 18x7.5J | Type A | p. 524 |
| Wheel size | 20x8J | Type B | p. 524 |
| Lug nut torque | 103 lb-ft | Printed for both wheel types; the manual gives 140 N-m as the metric figure. | p. 524 |
| Spare | A compact spare, T165/90D18 107M on an 18 x 4T wheel, inflated to 60 psi, for both wheel types. | All | p. 524 |
| TPMS | Direct (sensors) | The manual says the system uses tire pressure warning valves and transmitters to detect low tire inflation pressure. | p. 445 |
Compare this lug nut torque with other vehicles in the lug nut torque chart.
Compare this tire pressure with other vehicles in the tire pressure chart.
Compare these tire sizes with other vehicles in the tire size chart.
Exceptions the manual documents
Every Grand Highlander
The position of each wheel must be registered after a rotation. You can do it yourself by driving forward with moderate left and right turns, after turning the engine switch off and waiting 15 minutes or more. (p. 448)
Grand Highlanders on 20-inch tires
Chains go on the front tires, but tire chains cannot be mounted on vehicles with 20-inch tires. (p. 360)
Type B, 255/55R20
Only type B carries a high-speed note: above 100 mph, where the law permits, add 1 psi to the front and rear tires. (p. 524)
Reading these numbers
That 103 lb-ft is printed for both the 18-inch type A and the 20-inch type B. Use the figure for this vehicle, and read your own owner's manual before you set a wrench.
The tires are 255/65R18 111H on type A and 255/55R20 107V on type B. Both share the same compact spare, a T165/90D18 107M on an 18 x 4T wheel at 60 psi. On the 20-inch cars that means a spare that isn't the size of the road tires, so don't treat it as a fifth tire.
Type B also has the only high-speed note on the page: above 100 mph, where the law permits it, add 1 psi to the front and rear tires. For everyday driving, 35 psi is the number.
On chains, the winter section says to buy a set for the front tires, then adds a footnote that they cannot be mounted on vehicles with 20-inch tires. If you're shopping for a Grand Highlander you plan to drive in snow, that footnote is a reason to look at the 18s or at snow tires.
After rotating the tires, Toyota says the position of each wheel has to be registered. Park, turn the engine switch off, wait 15 minutes or more, and follow the display prompts in your owner's manual. It's a do-it-yourself job, but it isn't instant.
Sources
Every number above is quoted from the documents below. Each source entry was last checked against its manual on 2026-10-23.
2024 Toyota Grand Highlander Owner's Manual, USA and Canada (OM0E126U), page 524
Last checked against the manual on 2026-10-23.
"Tires and wheels Type A Tire size 255/65R18 111H, T165/90D18 107M (spare) Front 35 psi [...] Rear [...] 35 psi [...] Spare 60 psi [...] Wheel size 18 × 7.5J, 18 × 4T (spare) Wheel nut torque 103 ft•lbf (140 N•m, 14.3 kgf•m) [...] Type B Tire size 255/55R20 107V, T165/90D18 107M (spare) Front 35 psi [...] Rear 35 psi [...] Spare [...] 60 psi [...] Driving at high speeds (above 100 mph [160 [...] km/h]) (in countries where such speeds are permitted by law) Add 1 psi [...] to the front and rear tires. [...] Wheel size 20 × 8J, 18 × 4T (spare) Wheel nut torque 103 ft•lbf"
https://assets.sipb.toyota.com/publications/en/om-s/OM0E126U/pdf/OM0E126U.pdf
2024 Toyota Grand Highlander Owner's Manual, USA and Canada (OM0E126U), page 360
Last checked against the manual on 2026-10-23.
"purchase a set of tire chains for the front tires*. [...] * : Tire chains cannot be mounted on vehicles with 20-inch tires"
https://assets.sipb.toyota.com/publications/en/om-s/OM0E126U/pdf/OM0E126U.pdf
2024 Toyota Grand Highlander Owner's Manual, USA and Canada (OM0E126U), page 445
Last checked against the manual on 2026-10-23.
"Your vehicle is equipped with a tire pressure warning system that uses tire pressure warning valves and transmitters to detect low tire inflation pressure before serious problems arise."
https://assets.sipb.toyota.com/publications/en/om-s/OM0E126U/pdf/OM0E126U.pdf
2024 Toyota Grand Highlander Owner's Manual, USA and Canada (OM0E126U), page 448
Last checked against the manual on 2026-10-23.
"Wheel position registration can be performed by oneself. Wheel position registration is performed by driving forward with moderate left and right turns. [...] Park the vehicle in a safe place, turn the engine switch off and wait 15 minutes or more."
https://assets.sipb.toyota.com/publications/en/om-s/OM0E126U/pdf/OM0E126U.pdf
Frequently asked
What tire pressure does a 2024 Grand Highlander need?
The manual lists 35 psi front and rear for both wheel types, and 60 psi for the compact spare. Confirm against your own owner's manual and the door placard.
What is the lug nut torque for a Grand Highlander?
Toyota prints 103 ft-lbf (140 N-m) for both the 18-inch and 20-inch wheel types.
Can I use snow chains on a Grand Highlander?
Not with 20-inch tires. The manual says tire chains cannot be mounted on vehicles with 20-inch tires, and says to put them on the front tires for the rest.
Keep reading
The source entries were last checked against the 2024 owner's manual on 2026-10-23. Your trim and model year can differ, so confirm in your own owner's manual and on the tire placard before you buy or torque anything.